Description
Greenteeth® reduce the time and money spent on every stump. Each tooth has three cutting edges, and you can easily switch to a fresh edge with simple tools without removing the pocket. Made with the same high-quality carbide as the original Greenteeth, Wearsharp teeth provide a more consistent cut throughout the life of the tooth. Appropriate for most standard stump grinding machines ranging from 20 to 45hp.
Details
Through extensive research & development, Greenteeth improved upon their original Greenteeth by altering the concave of the tooth. The patented design of the Wearsharp allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over. To further improve the design, the 700 Wearsharp® has a reduced shank diameter at the end of the tooth allowing for the use of a smaller retaining nut, reducing wear on the fastener.
Use with 700 series LoPro® pockets, available in straight, angle & reverse.
Wearsharp teeth should be rotated or changed before the diameter starts to decrease or when performance is reduced.
Wrench Size: 1/2″
Torque: 20 FT-LBS (27Nm)
Warning: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Video 1:
- e_FTWmw3wo8
- Video 2:
- Ub5HWUUaP8I
- Item Status:
- Active
- Manufacturer Part Number:
- 700-WS
- Material:
- Carbide Steel
- Product Type:
- 700 Series