Treegator Original Watering Bag for Trees

$21.95 - $193.99
SKU:
PID6622

Treegator® is a slow release watering system for new trees. A Treegator® Original delivers a high volume of water directly to the root system of a newly planted tree with no run-off or evaporation. Treegator® Bags save you time, money and effort, while properly and efficiently watering your new trees.

$21.95 - $193.99

Description

Treegator® is a slow release watering system for new trees. A Treegator® Original delivers a high volume of water directly to the root system of a newly planted tree with no run-off or evaporation. Treegator® Bags save you time, money and effort, while properly and efficiently watering your new trees.

Details

360 View

 

Treegator® Original Spec Sheet

 

SPECS: Single bag fits min. 1 inch to max. 4 inch caliper tree with branches at least 25” from the ground or higher. Use a Double Bag setup (two (2) single Treegator® Original bags zipped together back-to-back) to water 4 inch to 8 inch caliper trees. Made of green polyethylene with nylon webbing, black polypro straps and green nylon zippers. 2 water release points per bag. Bag is empty in approximately 5 to 9 hours. UV stabilized to withstand exposure to sunlight. Fill opening fits up to 3" diameter hose.

 

DIRECTIONS FOR USE: Place around tree trunk, with the zippers on uphill side of tree. Wrap both sides around trunk until zippers meet and zip together from bottom to top. Lift tag to expose fill opening at top of bag. Insert hose into fill opening and begin filling with water. Fill bag to 1/4 capacity, Gently lift up on straps at top of bag to expand bottom. Fill to desired level and let empty. Continuously waters for approximately 5 to 9 hours.

 

MEASUREMENTS: Full - 30" tall x 18" wide (at base)