Greenteeth will reduce the time and money spent on every stump versus traditional teeth. Each tooth has three cutting angles, and you can easily switch to a fresh edge with simple tools and without removing the pocket. Made with the same high-quality carbide as the original Greenteeth, Wearsharp teeth provide a more consistent cut throughout the life of the tooth. Appropriate for most standard stump grinding machines ranging from 40 to 85hp.
Through extensive research & development, Greenteeth improved upon their original Greenteeth by altering the concave of the tooth. The patented design of the Wearsharp allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.
Use with 900 series pockets, available in straight, angle & reverse.
Wearsharp teeth should be rotated or changed before the diameter starts to decrease or when performance is inadequate.
Wrench Size: 5/8″
Torque: 35 Ft-LBS (47Nm)
900-WS and 900-WS2: Wheels 23" and larger
926-WS and 926-WS2: Wheels up to 22"
|900-WS||Wearsharp (23" wheels and larger)||900 Series LoPro Pockets|
|900-WS2||Wearsharp 2-Sided Shank (23" wheels and larger)||900 Series LoPro Pockets, Reverse-S|
|926-WS||Wearsharp (wheels less than 23")||900 Series LoPro Pockets|
|926-WS2||Wearsharp 2-Sided Shank (wheels less than 23")||900 Series LoPro Pockets, Greenwheel, Quadwheel, and Performance Upgrades|
Warning: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Carbide Steel
- Manufacturer Part Number:
- Product Type:
- 900 Series