Description
The Clogger Zero is a light and breathable chainsaw protective pants that has evolved and gotten even better with the Gen 2. The Zero Gen 2 is tougher and more durable while improving upon the cooling effect of the last version. The outer fabric incorporates NILIT Breeze yarn that keeps you cool and fresh in hot environments, and the new ripstop weaved high-tenacity nylon makes it 1.5 times stronger than before. One noticeable difference is that the back of the right leg has an added layer of cut-resistant Dyneema yarn designed to stop all of the little tears caused by your chainsaw as it hangs off the harness.
Details
Customer Video Review - Russell Desclos
Customer Video Review - Adam Castro
- Lightweight at just 2 lb 3 oz (Medium)
- Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266
- Designed and made in Invercargill, New Zealand
- UV protective outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn – Nilit® is proven to reduce body temperature
- 4-way stretch fabric for greater freedom of movement and flexibility with elasticised thread in the seat for extra give
- More high-tenacity nylon and a ripstop weave for a 1.5x stronger outer
- Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas.
- Ultra-high tear strength Dyneema® fabric at the right calf to protect against small cuts caused by the chainsaw, when hanging off the harness
- Elasticized waist for a snug fit & extra comfort
- Wide belt loops to fit up to 50mm (2 inch) belt
- Stronger and more durable zippers with a better seal to reduce the risk of sawdust damage with
- Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves
- Two zipped hip pockets; two zipped thigh pockets individually sewn to be able to remove saw dust with additional pocket on the left thigh, all accessible while wearing a harness
- High-vis panels front and rear
- Tough, mesh and large cooling vents at rear of both legs for ventilation
- Lace hooks to prevent the pants from riding up
- Slim fit with a just the right amount of fabric for easily movement
Clogger Size Chart Link
Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6 cms/2.5 inches of length to allow for lift from the harness an knee flex/bending while climbing.
Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist
- Waist measurement refers to the lower waist, where your trousers will normally sit.
Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6 cms/2.5 inches of length to allow for lift from the harness an knee flex/bending while climbing.
Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist
- Waist measurement refers to the lower waist, where your trousers will normally sit.
- Manufacturer Part Number:
- TU71ZXS
- Country of Manufacture:
- NZ